Metals and Fuel

Buying Blacksmith Coal in Canada

Where Canadian blacksmiths find good forge coal: guild group buys, suppliers, fuel dealers and US sources, plus what to ask, storage tips and alternatives.

On this page
  1. The short answer
  2. What counts as blacksmith coal
  3. Where Canadian smiths find coal
  4. What to ask a seller before you buy
  5. Cost, shipping and buying in bulk
  6. Storing coal through a Canadian winter
  7. Alternatives if coal is hard to get
  8. Is Canada still burning coal?

The short answer

You can buy blacksmith coal in Canada, but it usually takes more looking than in parts of the United States. The most dependable routes are:

  1. Blacksmith guilds and clubs, many of which organise bulk coal purchases for members
  2. Blacksmith, farrier and metalworking suppliers that carry bagged smithing coal
  3. Fuel dealers and coal yards in regions where coal is still used for heating
  4. Buying in the United States and bringing it back, or having it shipped

If coal is hard to get where you are, coke, lump charcoal and propane are all workable alternatives.

What counts as blacksmith coal

Blacksmith coal is a low-sulfur, low-ash bituminous coal that cokes well. As it heats, it softens and fuses, letting you build a compact, controllable fire. That’s quite different from anthracite, the hard coal commonly sold for heating stoves. Anthracite is difficult to light and keep going in a typical small forge.

So when a store has bagged coal on the shelf, check what it is before you buy a pallet. Our explainer on what coal is made of covers why sulfur, ash and volatiles matter in a forge.

Where Canadian smiths find coal

Blacksmith guilds and group buys

This is often the best route. Provincial and regional blacksmith associations and local clubs across Canada are common, and many coordinate bulk orders. That spreads delivery costs across many members and gives you coal that other smiths have already tried. Even if your local group doesn’t run a coal order, members usually know who sells decent coal nearby. Search for blacksmith or artist-blacksmith associations in your province, or ask at a local hammer-in or open forge night.

Blacksmith and farrier suppliers

Some Canadian suppliers of blacksmithing, farrier and metalworking equipment sell bagged smithing coal, sometimes alongside forges, anvils and tools. Stock and pricing vary, so call ahead. Ask specifically whether the coal is bituminous blacksmith coal or heating anthracite.

Farm, hardware and fuel dealers

In regions where people still heat with coal stoves, farm supply stores, rural hardware stores and fuel dealers may stock bagged coal. It’s usually anthracite for heating. Occasionally a dealer can source bituminous coal or tell you who supplies it. Coal yards that sell by the ton may also be worth a call, especially if a few smiths can split a load.

Buying from the United States

US blacksmith suppliers and coal dealers, especially in traditional coal regions, sell well-known smithing coals. Shipping a heavy, low-value product across the border can be expensive, and customs, duty and courier rules can add cost and paperwork. Check current requirements before ordering. Some Canadian smiths near the border pick up coal themselves when travelling, or combine orders with others.

What to ask a seller before you buy

  • Is it bituminous or anthracite?
  • What’s the sulfur content? Smiths generally look for low-sulfur coal, often quoted as under about 1%.
  • Does it coke well in a forge?
  • What size is it? Smaller, consistent pieces are easier to manage.
  • Can you buy one bag to test before buying in bulk?

Cost, shipping and buying in bulk

Coal itself is relatively cheap. Moving it is not. Bagged coal bought in small amounts, especially when shipped, can cost many times more per kilogram than bulk coal picked up locally. To keep costs down:

  • join a guild group buy if one exists near you
  • split a bulk order with other local smiths
  • pick up yourself where possible rather than paying for freight
  • buy enough for a season or more once you’ve found coal you like, if you have dry storage

Storing coal through a Canadian winter

  • Keep it dry and off the ground, in bins, sealed drums or a covered bay.
  • Snow and meltwater can soak bags and freeze them into solid lumps. Bring a working supply into a sheltered spot before cold snaps.
  • Coal in a bin can be dampened just before use. Many smiths wet coal anyway to help it coke around the fire.
  • Store it away from heat sources and keep the area tidy. Large, damp, compacted piles of some coals can self-heat, though small bagged quantities are low risk.

Alternatives if coal is hard to get

  • Coke: burns hot with little smoke, but needs a constant air blast and can be hard to find in small quantities.
  • Lump charcoal: widely sold in Canada for barbecuing, very low in sulfur and easy to light. You’ll use more by volume and it throws sparks. Avoid briquettes.
  • Propane: many beginners in Canada start with a propane forge because fuel is easy to buy and there’s no smoke.

Our coal vs coke vs charcoal comparison goes through the trade-offs in detail. For coal-buying tips that apply anywhere, see can you still buy coal?.

Is Canada still burning coal?

Coal’s role in Canadian electricity has shrunk a lot. Ontario phased out coal-fired power in 2014, and Alberta ended coal-fired electricity in 2024. Federal policy targets phasing out conventional coal-fired electricity by 2030. Some provinces, such as Nova Scotia, Saskatchewan and New Brunswick, have still used coal for part of their power in recent years. Canada also continues to mine coal, much of it metallurgical coal from British Columbia that is largely exported for steelmaking. None of this directly affects small bagged smithing coal sales, but it helps explain why local coal yards have become less common.

The complete guide to metals and fuel

What Wrought Iron Is Used For
Read the guide

Keep exploring

Guides from other topics

All topics →