Blacksmith History

Pioneer Blacksmiths: Facts About Life at the Frontier Forge

What pioneer blacksmiths made, how frontier forges worked, how smiths were paid and lived, and why the frontier smithy faded. Key facts about pioneer smiths.

On this page
  1. Why Every Frontier Settlement Needed a Blacksmith
  2. Who the Pioneer Blacksmith Was
  3. Inside a Frontier Forge
  4. What Pioneer Blacksmiths Made and Repaired
  5. Blacksmithing on the Trail and at Trading Posts
  6. How Frontier Forges Got Hot Enough
  7. Getting Paid: Barter, Credit and the Account Book
  8. Home and Family Life Around the Smithy
  9. Pioneer Blacksmith Facts at a Glance
  10. How the Frontier Smithy Faded
  11. Frequently Asked Questions

Why Every Frontier Settlement Needed a Blacksmith

When settlers pushed west across North America in the late 1700s and 1800s, they left behind the stores, foundries and factories of the East Coast. What they could not leave behind was iron. Plows, axes, wagon tires, chains, hinges, nails and horseshoes all wore out or broke. Without someone to mend and remake them, a farm couldn’t function.

That someone was the blacksmith. In many new towns the smith was one of the first tradesmen to set up shop, sometimes before there was a church or a school. The smithy worked as hardware store, repair shop and machine works all at once. Pioneer families depended on it, and it was often the busiest spot in a settlement.

This guide covers what pioneer blacksmiths actually did, what their shops looked like, how they got paid, and how their place in frontier life changed over the 19th century.

Who the Pioneer Blacksmith Was

“Pioneer blacksmith” isn’t a formal category. The phrase covers smiths who worked on the moving edge of American settlement: in the Ohio Valley and Kentucky in the late 1700s, across the Midwest in the early 1800s, and on the Plains, in the mountain West and along the overland trails from the 1840s onward.

Most learned the trade the traditional way, as an apprentice or by working beside a father or relative. Their training came out of the same craft that served colonial American blacksmiths in the 1600s and 1700s. On the frontier, though, the smith usually had to be more of a generalist. A town might support only one shop, so its owner handled everything from shoeing horses to repairing a gun lock.

Many frontier smiths farmed as well, or traded in land, livestock or goods on the side. A blacksmith’s income depended on how many people lived nearby. In a young settlement, smithing alone didn’t always pay enough.

Inside a Frontier Forge

A frontier smithy was usually a plain building of logs, rough boards or stone, often near a road or crossroads where farmers could easily bring in work. Inside, the layout was fairly standard:

  • The forge (hearth). A raised hearth of stone or brick held the fire, with a chimney or hood to carry off smoke. Air came in from below or from the side through a pipe called the tuyere.
  • Bellows. A large leather bellows, often hung from the ceiling and worked by a long lever, blew air into the fire. Later in the century, many shops switched to hand-cranked rotary blowers.
  • The anvil. A heavy iron anvil with a hardened steel face, mounted on a stump of hardwood. Through much of the 1800s many anvils in American shops were imported from England, although American makers grew more common later in the century.
  • The slack tub. A tub or trough of water for cooling work and tools.
  • Tools. Hammers, tongs in many sizes, chisels, punches, swages, fullers and a heavy vise. Smiths made a lot of their own tongs and specialty tools.
  • Stock and scrap. Bars of wrought iron, a small supply of steel, and a pile of old iron to reuse.

Shops were often kept fairly dim, because smiths judged the temperature of iron by its glowing color, and bright light makes that harder. If you’re curious what this kind of building was called, see our explainer on what a blacksmith’s workshop is called.

What Pioneer Blacksmiths Made and Repaired

Mending things probably made up a large share of a frontier smith’s work. Iron was expensive and often had to be freighted in, so very little was thrown away.

Plows and Farm Tools

Farm tools were the core of the business: plowshares, hoes, axes, mattocks, scythes, pitchforks, harrow teeth and log chains. Plowshares dulled quickly and had to be drawn out and resharpened, a job called “laying” or “pointing” a share.

The prairie raised a particular problem. The thick, sticky soil of the Midwest clung to cast-iron plows, forcing farmers to stop over and over to scrape them clean. In the late 1830s, John Deere, a blacksmith working in Grand Detour, Illinois, began making plows with polished steel moldboards that shed the soil far better. The story is often told as the moment a village smith’s fix grew into a manufacturing business, and it shows how closely frontier smiths were tied to the problems of the farmers around them.

Wagons and Wheels

Wagons kept the frontier moving, and smiths kept wagons moving. They forged and repaired axles, hounds, kingbolts, chains, hooks and brake parts. A key job was tire setting: fitting the iron rim, or tire, onto a wooden wheel.

The smith measured the wheel with a small measuring wheel called a traveler, then cut and bent a bar of iron into a hoop slightly smaller than the wheel and forge-welded the ends together. The hoop was heated in a fire until it expanded, dropped over the wheel and quickly doused with water. As it cooled, the iron shrank and pulled the wooden parts of the wheel tightly together.

Wheelwrights and blacksmiths often worked together on this, and in small towns one person might do both trades.

Shoeing Horses and Oxen

Shoeing was steady work. Horses, mules and oxen all needed shoes, especially on rocky ground or for heavy hauling. Oxen have cloven hooves, so each foot needed two separate half-shoes. Oxen are also reluctant to stand on three legs, so many shops used a heavy wooden frame, or a sling, to support the animal while it was being shod.

As the century went on, shoeing gradually became a specialty of its own. Our article on the difference between a farrier and a blacksmith explains how the two trades split.

Household Hardware and Repairs

Settlers also brought the smith pothooks, trammels, fireplace cranes, hinges, door latches, bolts, nails, kitchen knives, traps and fish hooks. A smith might mend a cracked kettle handle in the morning and repair the iron parts of a mill in the afternoon. Some frontier smiths also handled basic gun repairs, such as replacing springs and other lock parts, though true gunsmithing was a separate skill.

Blacksmithing on the Trail and at Trading Posts

The overland trails to Oregon, California and Utah, starting in the 1840s, pushed blacksmithing out onto the road. Emigrant guidebooks advised carrying spare wagon parts and basic tools, and some wagon companies brought a portable forge or a member who could do smith work.

Dry air on the Plains caused a common problem. Wooden wheels shrank as they dried out, and the iron tires worked loose. Emigrants often soaked wheels in streams to swell the wood again or wedged the tires tight, but sooner or later many tires had to be reset at a forge.

Trading posts and military forts along the trails often ran blacksmith shops, and emigrants valued them highly. Fort Bridger in present-day Wyoming, for example, was set up in the 1840s as a supply stop that offered blacksmithing to passing wagon trains. Army posts across the West employed smiths to shoe cavalry horses and repair wagons. Several 19th-century U.S. treaties with Native nations also included promises to supply a blacksmith, which shows how central the trade was to the iron-tool economy of the period.

How Frontier Forges Got Hot Enough

A common question is how smiths without modern equipment got iron hot enough to work. The answer is the combination of fuel and forced air.

Charcoal and coal both burn far hotter when air is pushed through them. The bellows or blower drove a steady blast into the center of the fire, raising the temperature enough to bring iron to a bright orange or yellow heat. That’s hot enough to shape iron easily and, at the hottest part of the fire, to forge-weld two pieces together.

Blacksmiths did not melt iron. Melting takes much higher temperatures, the kind reached in blast furnaces and foundries. A smith’s fire only needed to make the iron soft and plastic enough to hammer.

On the early frontier, where wood was plentiful, smiths often used charcoal, sometimes made locally. Coal was used where it could be mined or shipped in, and it became more common as railroads spread.

Getting Paid: Barter, Credit and the Account Book

Cash was often scarce on the frontier, so many smiths kept an account book and ran a tab for each customer. A farmer might pay the bill months later with grain, hay, firewood, meat or labor, or settle up after harvest. Surviving blacksmith account books, kept by many local historical societies, list work like “shod horse,” “laid plowshare” or “set tire,” next to a mix of cash and goods received.

This system tied the smith closely to the farming calendar. Spring brought a rush of plow and harrow work, and summer brought tools for haying and harvest. Busy seasons meant long days.

Were pioneer smiths well off? Generally they were steady tradesmen rather than wealthy people. A skilled smith in a growing town could do reasonably well, and some went into larger businesses. Others struggled to collect what they were owed. For the broader picture across history, see our article on whether blacksmiths were typically wealthy.

Home and Family Life Around the Smithy

Many frontier smiths lived right beside or behind their shops, and sometimes above them. There wasn’t a special name for a blacksmith’s house. In Britain, though, cottages next to old smithies are often still named “Forge Cottage” or “Smithy Cottage” today.

The work was physically hard and hot, with a constant risk of burns, eye injuries from flying scale, and kicks from nervous animals. Days often started early, and in busy seasons work went on as long as there was light.

Family members commonly helped. Children pumped the bellows, fetched water and fuel, and swept up. A son might work as the striker, swinging the heavy sledge while the smith held the work and guided the blows. Women in smithing families sometimes worked in the shop too, especially widows who kept a business going. Women blacksmiths were unusual but not unknown in the 1800s, as covered in our article Did female blacksmiths exist?.

The shop was also a social space. Farmers waiting on a repair traded news, prices and gossip around the warm forge, especially in winter.

Pioneer Blacksmith Facts at a Glance

  • Blacksmiths were often among the first tradesmen to set up in new frontier towns.
  • Most of their work was repair, because iron was costly and hard to get.
  • Their main material was wrought iron, with small amounts of steel welded on for cutting edges.
  • Setting iron tires on wooden wagon wheels was a core job.
  • Oxen needed two-piece shoes on each foot because of their cloven hooves.
  • Bellows or hand-cranked blowers forced air into the fire to reach working heat. Smiths heated iron but didn’t melt it.
  • Customers often paid in goods or labor, recorded in an account book.
  • John Deere was a blacksmith when he started making steel plows suited to prairie soil in the late 1830s.
  • Trading posts and Army forts along the western trails ran smithies for travelers and troops.
  • Many smiths also farmed, and many lived next to their shops.

If any of the shop vocabulary above is new to you, our glossary of common blacksmithing terms explains words like tuyere, swage and fuller.

How the Frontier Smithy Faded

Several changes in the second half of the 1800s chipped away at the frontier smith’s role:

  • Railroads brought cheap factory-made tools, nails and hardware into towns that once relied on local forges.
  • Cheap steel, made possible by new processes from the 1850s onward, made factory goods even cheaper and more uniform.
  • Mail-order catalogs from the 1870s onward let rural families order tools and hardware directly.
  • Machinery such as power hammers and drill presses moved some smithing into larger shops and factories.

Many smiths adapted by focusing on repair work, shoeing, and fixing the farm machinery that factories were now selling. In the early 1900s, as tractors and automobiles replaced horses, many rural blacksmith shops turned into garages and machine shops, and many smiths became the first generation of local mechanics. The same story played out in Britain, as described in our look at Victorian blacksmith facts.

The craft didn’t disappear. A revival that began around the 1970s brought new interest in traditional smithing, and today’s smiths go by a range of titles, as explained in What are modern day blacksmiths called?.

Frequently Asked Questions

What was a pioneer blacksmith’s house called?

There was no special name. Most smiths lived in an ordinary house or cabin next to, behind or above the shop. The shop itself was called a smithy, forge or blacksmith shop.

Did women work as pioneer blacksmiths?

A small number did, usually wives, daughters or widows in smithing families. It was uncommon, and records are patchy, but women did take part in the work.

Were pioneer blacksmiths rich?

Usually not. Most were respected, steadily employed tradespeople whose income depended on local demand, and they were often paid in goods rather than cash.

Why were blacksmiths so important on the frontier?

Almost every tool and vehicle a frontier family relied on had iron parts that wore out or broke. The blacksmith was often the only person nearby who could make or mend them.

Keep exploring

Guides from other topics

All topics →