Blacksmith History

Victorian Blacksmith Facts

Key facts about Victorian blacksmiths: the village smithy, railway and shipyard smiths, steam hammers, Black Country chainmakers and Gretna Green weddings.

On this page
  1. Victorian Blacksmiths in Brief
  2. The Village Smithy: The Heart of a Horse-Powered Country
  3. What a Victorian Blacksmith Made
  4. Industrial Smiths: Railways, Shipyards and Steam Hammers
  5. From Wrought Iron to Mild Steel
  6. Nail and Chain Makers of the Black Country
  7. Blacksmiths in Victorian Culture
  8. The Core Skills a Victorian Smith Used
  9. The Beginning of the End
  10. Quick Answers to Common Questions

Victorian Blacksmiths in Brief

Queen Victoria reigned from 1837 to 1901, a period when Britain was both the world’s leading industrial power and still a country that ran largely on horses. The blacksmith stood at the meeting point of those two worlds. In villages, the smith shod horses and mended farm tools much as smiths had for centuries. In the cities, smiths worked in railway works, shipyards and engineering firms, often alongside powerful new machines.

So did blacksmiths exist in the 1800s? Very much so. The 19th century was arguably one of the busiest periods the trade ever saw. It was also the century that laid the groundwork for the trade’s decline.

The Village Smithy: The Heart of a Horse-Powered Country

For most of the Victorian era, horses pulled the plows, carts, carriages, cabs and buses. Every horse needed shoes, and the shoes wore out within weeks under heavy work. Shoeing was therefore a large share of the business for many village smiths, along with repairs to farm equipment.

A typical rural smithy sat on a main road or at the center of the village. It had a brick or stone forge with a chimney, a large bellows, an anvil, a slack tub of water and racks of tongs and hammers. Farmers and carters would wait there while their horses were shod. That made the smithy one of the village’s natural meeting places, along with the pub and the church.

Many villages had at least one smith, and larger ones had several. The smith often worked with a striker or an apprentice, and in many cases the trade passed from father to son for generations.

What a Victorian Blacksmith Made

The range of work was wide. A Victorian smith might in a single week:

  • Shoe horses and make horseshoes from bar iron
  • Repair or make plowshares, harrows, hoes, scythes and other farm tools
  • Mend cart and wagon parts, and set iron tires on wheels with the local wheelwright
  • Forge gate hinges, latches, hooks, brackets and chains
  • Make or repair fire grates, pothooks and other household ironwork
  • Sharpen and harden tools such as chisels and stone-dressing picks

Ornamental work, such as gates, railings and church ironwork, was another branch of the craft. Cast iron, poured into molds in foundries, became very popular for railings and decorative work during the Victorian period, and it competed with hand-forged iron.

Industrial Smiths: Railways, Shipyards and Steam Hammers

The railway boom from the 1830s onward created a huge demand for forged parts: axles, couplings, springs, brackets, bolts and many others. Large railway works employed whole shops full of smiths, working in teams at rows of hearths. Shipyards, boilermakers and engineering firms did the same.

Industrial forging needed more force than a human striker could supply. In 1839 the Scottish engineer James Nasmyth designed the steam hammer, a machine that lifted a heavy hammer head with steam and dropped it on the work with great force, yet could also be controlled precisely. Steam hammers and other power hammers made it possible to forge much larger pieces, such as heavy shafts and anchors.

In these settings the smith’s job looked quite different from the village forge. Work was organized into teams, with a smith in charge, strikers and helpers. Many items were made over and over to standard patterns.

From Wrought Iron to Mild Steel

At the start of the Victorian era, the blacksmith’s main material was wrought iron: a tough, fibrous, low-carbon iron that welded easily in the forge. Steel was comparatively scarce and expensive, and it was used mainly for edges and springs.

That changed in the second half of the century. Henry Bessemer’s converter process, announced in the mid-1850s, and the open-hearth process developed in the following decade made it possible to produce steel in bulk at much lower cost. By the end of the 1800s, mild steel had begun to replace wrought iron for many uses.

For blacksmiths, cheap steel was a mixed blessing. It was a useful new material, but it also made factory-produced goods cheaper, which undercut a lot of the smith’s traditional work.

Nail and Chain Makers of the Black Country

Not every Victorian smith worked in a village forge or a railway works. In the Black Country of the English West Midlands, nail making and chain making were often done in small backyard forges attached to workers’ homes.

These trades were notable for how many women and children took part. Women forged nails and smaller chain by hand, often working long hours for low pay set by middlemen. Hand nail making declined as machine-made nails took over during the 1800s. Hand chain making carried on into the 20th century: in 1910, women chainmakers in Cradley Heath went on a widely reported strike for a minimum wage, organized with the help of the campaigner Mary Macarthur.

If you’ve wondered what women in the trade were called, the answer is simply blacksmiths, nailers or chainmakers, the same as men. Our article Did female blacksmiths exist? looks at the history in more detail.

Blacksmiths in Victorian Culture

“The Village Blacksmith”

One of the best-known images of the 19th-century smith comes from the American poet Henry Wadsworth Longfellow. His 1840 poem “The Village Blacksmith” opens with the lines “Under a spreading chestnut tree / The village smithy stands.” The poem presents the smith as strong, honest and hardworking, and it was widely read and memorized in schools on both sides of the Atlantic. It helped fix the romantic image of the village smith that many people still hold today.

Gretna Green’s Anvil Weddings

Gretna Green, just over the Scottish border, became famous for runaway weddings. After a 1754 law tightened the rules on marriage in England, couples could still marry in Scotland simply by declaring themselves married before witnesses. Gretna Green was the first convenient stop over the border, and the blacksmith’s shop there became closely associated with these weddings. Ceremonies were held “over the anvil,” and the men who officiated became known as anvil priests.

A Scottish law passed in the 1850s added a residence requirement that made quick marriages harder, but Gretna Green kept its reputation. Its blacksmith’s shop is still a popular wedding venue.

The Smith and the Bible

Victorian Britain was a strongly Bible-reading society, and blacksmiths appear in scripture. Genesis names Tubal-cain as an early worker in brass and iron. The Book of Isaiah speaks of beating swords into plowshares. These passages were familiar to many people of the period, and the image of the smith turning weapons into farm tools was a popular one. You can read more about Tubal-cain and other legendary smiths in our article on gods of the forge.

The Core Skills a Victorian Smith Used

People sometimes ask about the “seven skills” of a blacksmith. There’s no single official list, but the basic forging operations are often grouped like this:

  1. Drawing out: lengthening and thinning a bar
  2. Upsetting: thickening a bar by shortening it
  3. Bending: shaping curves and angles
  4. Punching and drifting: making and enlarging holes
  5. Cutting: separating or splitting hot metal with chisels
  6. Swaging and fullering: shaping with forming tools
  7. Forge welding: joining two pieces in the fire

Victorian smiths combined these with heat treatment (hardening and tempering steel) and finishing. Our glossary of common blacksmithing terms explains each one.

The Beginning of the End

By the end of Victoria’s reign, the pressures on the trade were clear. Factories turned out cheap tools, nails, chains and hardware. Cast iron and mass-produced steel goods competed with forged work. Shoeing horses remained steady work for a while, but the arrival of motor vehicles and tractors in the early 20th century began to remove even that.

Many smiths adapted by moving into farriery, agricultural engineering or motor repair. The same pattern unfolded on the American frontier, as described in our guide to pioneer blacksmiths.

Quick Answers to Common Questions

Did blacksmiths exist in the 1800s? Yes. They were found in nearly every town and village and in large numbers in industrial works.

What did Victorian blacksmiths wear? Typically everyday working clothes with a heavy leather apron to protect against sparks and scale.

Did Victorian blacksmiths shoe horses? Many did. Shoeing was a large part of the village smith’s work, though specialist farriers also existed. See farrier vs blacksmith for the difference.

What metal did they use? Mainly wrought iron, with steel for edges and springs. Mild steel became more common late in the century.

The complete guide to blacksmith history

Pioneer Blacksmiths: Facts About Life at the Frontier Forge
Read the guide

Keep exploring

Guides from other topics

All topics →