Anvils and Tools

Blacksmithing Tools of the Trade: The Beginner's Essential Kit

The essential blacksmithing tools for beginners: forge, anvil, hammer, tongs and safety gear, plus what to add later, what to improvise and what to buy first.

On this page
  1. What “tools of the trade” means for a new smith
  2. The core kit
  3. Safety gear belongs in the kit
  4. The second wave: tools that make work easier
  5. Tools you can make or improvise
  6. A sensible buying order
  7. Is forging a cheap hobby?
  8. What do you call a female blacksmith?

What “tools of the trade” means for a new smith

“Tools of the trade” is an old phrase for the equipment a particular job depends on. Carpenters have saws and planes; blacksmiths have a fire, something hard to hit on, something to hit with, and a way to hold metal that’s too hot to touch.

The good news for beginners is that the essential kit is short. Traditional smiths made most of their own tools, and plenty of hobbyists today start with a few bought items and make the rest at the forge. The bad news is that the one item that really matters, the anvil, is also the hardest to find cheaply.

This guide covers the core kit, the safety gear that belongs alongside it, the tools worth adding once you’re forging regularly, and a sensible order to buy things in.

The core kit

You can do real forging work with five things: a forge, an anvil, a hammer, tongs and a bucket of water. Everything else makes the work easier, faster or more precise.

A heat source: the forge

The forge gets steel hot enough to move under the hammer. Beginners usually choose between two types:

  • Gas (propane) forges light quickly, are fairly clean and are easy to control. Plenty of hobbyists start with one. They burn fuel whether or not you’re using the heat, and they give off carbon monoxide, so you need good ventilation. A carbon monoxide alarm in any enclosed workspace is a sensible precaution.
  • Solid-fuel forges (coal or charcoal) need an air supply from a blower, and you have to learn fire management. In return they let you heat just one small section of a bar, and they’re the traditional choice. They make smoke, which can matter if you have close neighbours.

A simple homemade forge, such as a brake drum fire pot or a small insulated gas forge, is a very common first project. If you want to keep costs down, our guide to poorboy blacksmith tools covers improvised heat sources and their limits.

The anvil

The anvil is the centre of the shop. A good one has a hard steel face that returns the hammer’s energy instead of soaking it up, so the metal moves more with each blow. It’s usually the most expensive item in a beginner’s kit. Our article on why anvils are so expensive explains why.

Three things to sort out early:

  • Type and quality. Forged or cast steel anvils work well. Cheap cast iron “anvil-shaped objects” generally don’t. Our anvil review and buying guide compares the main types.
  • Weight. Heavier is generally better up to a point, but good mass in a smaller package can still work. See how heavy a blacksmith anvil should be.
  • Condition, if buying used. A worn but sound antique can be a great buy. A badly repaired one isn’t. Our guide to inspecting a used anvil explains the rebound and ring tests.

An anvil also needs a solid stand at the right height. A wobbly or badly sized stand wastes effort and strains your back. We cover stumps, timber stacks and steel stands in how to make an anvil stand.

A forging hammer

Most beginners do well with one general-purpose forging hammer of moderate weight, often somewhere around 2 to 2.5 pounds (roughly 1 kg). A cross peen or rounding hammer is the usual choice. A hammer that’s too heavy tires you out quickly and makes your blows less accurate. Our guide to choosing your first blacksmith hammer covers weight, head shape and handles.

Tongs

Tongs hold the work once it’s too short or too hot to hold by hand. No single pair holds everything securely, which is why experienced smiths own so many. A beginner usually needs only two or three pairs matched to the stock they use most. Our guide to blacksmith tongs for beginners explains which types to get first.

Here’s a useful trick at the start: forge on the end of a long bar so you can hold the cold end by hand, then cut the finished piece off. That postpones the need for tongs on many small projects.

A quench bucket

A metal bucket or similar container of water sits next to the anvil. You use it to cool tongs, cool a section of work and put out stray embers. Heat treating blades and tools may need other quench media later, but plain water covers most everyday forging needs.

Safety gear belongs in the kit

Safety equipment should be in the first purchase, not on a “later” list:

  • Eye protection. Safety glasses rated for impact. Hot scale, chips from tools and sparks from grinding are all real hazards.
  • Hearing protection. Hammering on a ringing anvil is loud, and the damage adds up over time.
  • Natural-fibre clothing. Cotton or wool chars, while many synthetics melt and stick to skin. Long trousers that cover the tops of your boots help keep hot scale out of footwear.
  • Sturdy closed footwear. Leather boots are the common choice.
  • A leather apron. Optional for some smiths, but useful protection for your clothes and lap. See our guide to blacksmith aprons.
  • A fire extinguisher and a clear floor. Keep flammables away from the forge area.

Gloves are a personal choice. Many smiths wear one on the tong hand and leave the hammer hand bare for better grip and control. Keep in mind that gloves don’t make hot metal safe to grab, and they should never be worn near rotating machinery like drill presses.

The second wave: tools that make work easier

Once you’re forging regularly, these tools start earning their keep.

A vise

A blacksmith’s leg vise (also called a post vise) has a leg that runs down to the floor, so it can take heavy hammering while holding hot work for bending, twisting and filing. Machinists’ bench vises can work for light jobs. They’re generally not designed for repeated heavy blows, and cast-iron bench vises in particular can crack.

Hardy tools

Hardy tools have a square shank that drops into the anvil’s hardy hole. The most common are a cutting hardy for cutting hot stock and a bending fork. Swages and fullers follow later. Our article on hardy tools explained covers the main types and how to use them safely.

Punches, chisels and drifts

Hot punches make holes, hot chisels cut and split, and drifts open punched holes to a set size. Many smiths make these from tool steel or salvaged high-carbon steel. Old files can be turned into cold chisels and woodworking chisels. See making chisels from old files.

Files, wire brush, marking and measuring

A stiff wire brush removes scale. A few files clean up edges. A soapstone pencil marks hot work. A steel rule, calipers and a square help you make matching parts. You don’t need precision measuring tools to start: a rule and a soapstone pencil cover most early projects.

Once your work is good enough to sign, a maker’s mark is a satisfying project. Our guide to making a steel hand stamp walks through it.

Tools you can make or improvise

Blacksmithing is one of the few crafts where you can make much of your own equipment. Common early projects include:

  • Tongs, made either from scratch or from purchased blanks
  • Punches, chisels and drifts from salvaged tool steel
  • Simple hardy tools such as a bending fork
  • Hooks and racks for organising the shop
  • A steel or timber anvil stand

Improvised anvils, such as a block of heavy steel or a section of rail stood on end, can also get you started while you look for a proper anvil. They have real limits, which we cover in our guide to poorboy blacksmith tools.

A sensible buying order

If you’re building a kit from nothing, this order spreads the cost sensibly and avoids buying things you don’t need yet:

  1. Safety gear. Eye and hearing protection, suitable clothing, a fire extinguisher.
  2. A heat source. Bought, built or improvised.
  3. Something hard to hit on. A real anvil if you can find one at a fair price, otherwise a solid steel block while you keep looking.
  4. One good forging hammer.
  5. Two or three pairs of tongs that fit the stock you use most.
  6. A quench bucket and wire brush.
  7. A vise, then hardy tools and punches as your projects demand them.

It’s also worth taking a class or visiting a local blacksmithing group before buying big items. You’ll get to try different hammers and anvils, and members often know of second-hand tools for sale.

Is forging a cheap hobby?

It can be, but it depends heavily on how much you build or improvise yourself and how lucky you are with second-hand finds. The anvil is usually the largest single expense, and fuel and steel are ongoing costs. We break this down in is blacksmithing a cheap hobby?

Once you have the kit, the next question is what to do with it. Our articles on what blacksmiths craft and the 7 skills of a blacksmith cover the projects and techniques the tools are for.

What do you call a female blacksmith?

A blacksmith. The word describes the craft, not the person, and “smith” works for anyone who does the work. Women have worked in metal trades throughout history, and many professional and hobby smiths today are women. There’s no separate standard term.

Keep exploring

Guides from other topics

All topics →