The short answer
Yes, you can teach yourself blacksmithing. Many capable smiths learned mostly on their own, from books, videos and lots of practice. But going entirely solo is slower than it needs to be, and it makes it easy to build bad habits that are hard to break. The best approach for most people is mostly self-directed practice, plus a class, a club visit or a session with an experienced smith whenever you can get one.
This article gives you a staged roadmap, the resources worth using and ways to get feedback when you’re forging alone.
What you can and can’t learn on your own
You can learn well from books and video:
- The basic operations: drawing out, bending, twisting, punching, cutting and upsetting
- Project sequences and tool designs
- The theory behind heat colours, steel types and heat treatment
- How to set up a forge and anvil
What’s harder to learn alone:
- Body mechanics. Most self-taught beginners grip the hammer too hard, swing from the shoulder, stand at an awkward height or hit with the hammer face at an angle. A teacher spots this in seconds. Alone, you may not notice until your elbow hurts.
- Fire management. Reading a coal fire, or getting a gas forge to heat evenly, is easier to learn by watching someone.
- Judging heat. Video cameras don’t show forging colours accurately, so learning what “yellow heat” looks like in your own light takes guidance or plenty of trial and error.
- Safety habits. It’s easy to pick up careless practices without realizing they’re dangerous.
The best approach: mostly self-taught, with occasional help
Even a single beginner class before you start, or a visit to a local club’s open forge, makes self-teaching much more effective. After that, an occasional lesson or club meeting every few months is enough to catch problems early. If cost is a concern, see how much it costs to learn blacksmithing. Many clubs run free or low-cost beginner sessions.
Before you start: safety and a basic setup
A basic self-taught setup includes:
- A propane or solid-fuel forge, set up outdoors or in a well-ventilated space
- An anvil, or a heavy block of steel as a substitute
- A cross-peen hammer of roughly 2 to 3 pounds
- Tongs sized to your stock, or locking pliers to begin with
- A vise, ideally a leg vise
- A bucket of water and a fire extinguisher
- Safety glasses, hearing protection, natural-fiber clothes and leather boots
Read our beginner safety guide before you light a fire, especially the sections on ventilation, galvanized steel and burns. With no instructor to warn you, you need to know the risks in advance.
The roadmap
These stages overlap, and there’s no fixed time for each. Move on when you can do a stage’s work reasonably well, not when a calendar says so.
Stage 1: Fire and hammer control
- Learn to light, maintain and control your forge, and to heat a piece evenly without burning it.
- Practise hammer blows on hot stock: flat, square blows, then controlled blows on the edge of the anvil.
- Forge tapers on round and square bar: square taper first, then square to octagon to round.
- Set your anvil at a comfortable height. Roughly knuckle height when standing is a common starting point.
Milestone: a clean, straight, centred square taper.
Stage 2: The core operations through simple projects
- S-hooks and J-hooks: tapering, scrolling, bending
- A fire poker or roasting fork: drawing out, twisting, bending
- A bottle opener: punching, drifting and shaping a hole
- A simple leaf: fullering and spreading
- Hooks with an upset end or a mounting hole: upsetting, punching
Milestone: you can make a matching pair of hooks. Making two the same is much harder than making one.
Stage 3: Tools and basic heat treatment
- Make punches, a hot cut chisel and drifts from suitable tool steel.
- Learn the basics of hardening and tempering on those tools.
- Make a pair of tongs. It’s a classic test of control and a big step up in what you can handle at the forge.
Milestone: a working pair of tongs that holds stock securely.
Stage 4: Joinery and forge welding
- Traditional joinery: collars, rivets, mortise and tenon
- Forge welding: start with a simple faggot weld or a scarf weld on mild steel, then move on to more complex welds
Forge welding is the stage where many self-taught smiths get stuck. It’s worth getting help in person for it if you can.
Milestone: a forge weld that doesn’t come apart when you bend it.
Stage 5: Choose a direction
By now you’ll probably know whether you’re drawn to architectural work, tools, decorative work or knives. Each branch has its own skills to learn, such as heat treating blade steels, scrollwork and design, or making your own touchmark to sign your work.
Learning resources
Structured curricula. ABANA has published a National Curriculum, modelled on the California Blacksmith Association’s program. It lays out levels of projects, and it can be followed at your own pace. This is one of the best tools for self-learners because it gives you a structure and standards to aim for.
Books. A few that are widely recommended for beginners:
- The New Edge of the Anvil by Jack Andrews
- The Complete Modern Blacksmith by Alexander Weygers
- The Art of Blacksmithing by Alex W. Bealer
- The Backyard Blacksmith by Lorelei Sims
- Mastering the Fundamentals of Blacksmithing by Mark Aspery
- Practical Blacksmithing, compiled by M.T. Richardson (a 19th-century collection, so read its safety and materials advice critically)
Video. YouTube has a wide range of blacksmithing channels. Look for instructors who explain why they’re doing things, not just what. Essential Craftsman’s beginner videos on starting blacksmithing cheaply are popular with people starting from scratch.
Forums and communities. iForgeIron and other blacksmithing forums and subreddits can answer specific questions, especially if you post clear photos.
Magazines and newsletters. See our list of blacksmith magazines and newsletters. Chapter newsletter archives are full of demonstration write-ups.
How to get feedback when you’re learning alone
- Film yourself forging from the side and the front. Compare your stance, swing and posture with experienced smiths.
- Post photos of your work and ask specific questions, like “why does my taper go off-centre?” rather than “what do you think?”
- Keep your early pieces. Comparing them with later work shows your progress and reveals recurring problems.
- Visit a club meeting or hammer-in a few times a year, and bring pieces for others to look at.
- Book an occasional private lesson to fix specific problems.
Common mistakes self-taught smiths make
- Hammering steel that’s too cold. It’s hard on you and your tools, and it can crack the work. Put it back in the fire sooner.
- Gripping the hammer too tightly. This tires your arm and can contribute to elbow and wrist problems.
- Wrong anvil height, too low or too high, causing back strain and poor blows.
- Burning the steel by leaving it in a hot fire too long.
- Using unknown scrap steel for blades or tools without understanding how it will respond to heat treatment.
- Forging galvanized or coated metal, which can give off hazardous fumes.
- Skipping the basics to rush into knives or complex projects.
- Poorly fitting tongs, which let work slip or fly out.
A simple weekly practice plan
If you can forge a couple of times a week, a structure like this helps:
- Warm-up (15 minutes): forge tapers on scrap bar, focusing on clean, controlled blows.
- Skill focus (45–60 minutes): one operation from your current stage, repeated several times.
- Project (remaining time): apply the skill to an actual piece.
- Review: look at what went wrong and note one thing to change next session.
Short, regular sessions usually do more for your skills than occasional marathons. If you find you’d like more structured instruction, our guide to how to become a blacksmith covers classes, clubs and voluntary credentials, and our guide to blacksmithing apprenticeships in the USA explains how to find longer-term mentoring.