The short answer
Learning blacksmithing can cost anywhere from almost nothing to many thousands of dollars, depending on how you learn. A rough picture for the US:
| Way of learning | Typical cost range (USD, approximate) |
|---|---|
| Club open forge days and beginner nights | Free to low cost, often with an annual membership |
| Short taster session (2–3 hours) | Around $100 |
| One-day intro class | A few hundred dollars |
| Weekend class | Several hundred dollars |
| Week-long craft school class | Often from several hundred to well over $1,000 in tuition, plus housing and meals |
| One-on-one intensive (a week) | Often in the low thousands |
| Farrier school (weeks to months) | Several thousand dollars and up |
| Basic home setup | From under $100 (improvised) to several hundred dollars |
These are broad ranges, not quotes. Prices vary a lot by region, school and instructor, and they change over time. Always check current prices with the provider.
Class and course costs
Taster sessions
Many studios offer a short introduction, often two to three hours, so you can try forging before committing. One Colorado school, Forge With Intention, has listed a two-hour intro for $100, where you leave with a small finished piece. Taster sessions are a low-risk way to find out whether you enjoy the heat, noise and physical work.
One-day and weekend classes
A full-day beginner class teaches fire management, hammer control and the basic operations through a few small projects. The same school listed a one-day intro at $275 and weekend classes (about two and a half days) at $450, with small extra materials fees on some bladesmithing classes.
Watch for:
- Class size: small classes with a forge per student (or per pair) give you much more hammer time.
- What’s included: many schools include materials and safety gear, but some charge separately.
- Prerequisites: intermediate classes often require a beginner class first, so budget for the sequence.
Week-long classes at craft schools
Residential craft schools such as John C. Campbell Folk School, Penland School of Craft, Peters Valley and others run week-long blacksmithing classes with experienced instructors. Tuition is only part of the cost. Housing, meals, studio or materials fees and travel can add a lot, so look at the full price when comparing.
Many of these schools offer scholarships and work-study places that can greatly reduce costs. See our guide to apprenticeship-style training in the US for more on work-study programs.
One-on-one instruction
Private instruction is the fastest way to progress, because every minute is focused on you. It’s also the most expensive per hour. Forge With Intention listed a week-long one-on-one intensive at roughly $2,500. Shorter private lessons by the hour or half day are often available from independent smiths.
Farrier school
Farrier training is a career investment rather than a hobby class. As one example, the Arkansas Horseshoeing School has been reported to charge from around $6,900 for an 8-week course to $15,900 for a 24-week course. Programs vary widely, so compare course length, horse-handling time and mentoring opportunities, as well as price.
Equipment costs for practicing at home
At some point most learners want to practise at home. You can start cheaply or spend a lot.
A budget setup might use a small homemade or entry-level propane forge, or a simple solid-fuel forge. Add a heavy block of steel or a thick piece of steel bar as an anvil, a secondhand cross-peen hammer and a pair of tongs or locking pliers. With careful scrounging, people have started for around $100. More commonly, a modest but workable setup runs to a few hundred dollars.
A more comfortable setup adds a proper anvil, a better forge, a few pairs of tongs and a leg vise:
- Anvils are usually the single biggest purchase. New and used anvils are often priced by weight, and good ones can cost several hundred to well over a thousand dollars.
- Commercial propane forges suitable for beginners often cost a few hundred dollars.
- Tongs cost anything from inexpensive basic pairs to more for well-made ones. Many smiths eventually make their own.
- Leg vises are often found secondhand at farm sales and through clubs.
Safety gear is a must, not an optional extra: safety glasses, hearing protection, leather boots, natural-fiber clothes, a leather apron, gloves and a fire extinguisher. Much of it is inexpensive. See our beginner safety guide for a full list.
Ongoing costs: fuel, steel, consumables
- Fuel: propane or coal (or charcoal). Consumption depends on your forge size and how long you work, so track your own usage for a few sessions to get a real figure.
- Steel: mild steel bar for practice is relatively inexpensive, especially if you buy offcuts or from a local steel supplier rather than a hardware store. Tool steel and knife steel cost more.
- Consumables: abrasives, grinding belts, wire brushes, files, finishes (wax, oil, paint) and replacement parts.
- Memberships: local guilds and national organizations like ABANA have annual dues, usually modest.
Hidden costs
- Travel and lodging for classes away from home
- Space: a safe, ventilated area to forge, plus anything needed to make it safe, such as fireproofing or ventilation
- Time: the biggest cost for most people. Progress depends on regular practice.
How many classes before buying gear?
There’s no single rule, but a common approach is to take at least one full-day or weekend class before spending serious money on equipment. One class tells you whether you enjoy it. Two or three teach you enough to know which forge, hammer weight and anvil style suit you.
If you have a local club with open forge time, you can delay buying an anvil or forge for a long time while you learn and keep an eye out for good used tools.
Ways to learn for less
- Join a local club. Open forge days and beginner nights are often free or low cost for members.
- Volunteer. Living history sites and craft schools sometimes train volunteers or offer work-study.
- Apply for scholarships. Craft schools and some blacksmithing associations offer them.
- Buy used. Anvils, vises and hammers last for generations and often turn up at estate sales, auctions and club tailgate sales.
- Make your own tools. Tongs, punches, chisels and hooks are classic beginner projects.
- Use free resources. Structured curricula, forums and video series can carry you a long way between classes. Our self-learning roadmap explains how to combine them.
Sample first-year budgets
These are illustrative, not quotes. Your numbers will differ.
“Try it out” path: one taster session, one weekend class and a year of local club membership. Mostly class fees, a few hundred to several hundred dollars in total, with no equipment purchase.
“Home forge” path: one weekend class, a modest used setup (forge, anvil substitute or small anvil, hammer, tongs, vise), safety gear and fuel and steel for regular practice. Often several hundred to over a thousand dollars.
“Serious learner” path: several classes or a week at a craft school, a proper anvil, a quality forge and a growing set of tools. This can easily run into a few thousand dollars.
If you’re weighing up whether the investment could ever pay for itself, see how much blacksmiths make. For the full path from first class to independent work, see how to become a blacksmith.