Anvils and Tools

Is blacksmithing a cheap hobby?

Is blacksmithing a cheap hobby? What a forge, anvil, hammer, tongs and fuel cost relative to each other, three ways to start, hidden costs and how to save.

On this page
  1. The short answer
  2. Where the money goes
  3. Three ways to start
  4. Ongoing costs
  5. Bladesmithing costs more
  6. Hidden costs people forget
  7. Ways to keep it cheap
  8. Can the hobby pay for itself?

The short answer

Blacksmithing can be a fairly cheap hobby, but it isn’t automatically one. If you’re willing to improvise, build your own forge and hunt for second-hand tools, many people get started for modest money, often a few hundred dollars or the local equivalent. If you buy a full set of new, purpose-made equipment, the bill can run well into the thousands.

The biggest single variable is usually the anvil. After that come the forge and, if you get into knifemaking, a belt grinder. Day-to-day running costs (fuel and steel) are moderate for most hobbyists.

Prices vary a lot by country, region and year, so treat everything below as relative guidance rather than a price list.

Where the money goes

Item Relative cost Notes
Anvil High Often the largest expense. Improvised steel blocks are cheap, while new forged anvils are expensive
Forge Low to high Homemade brake drum or small gas forges are cheap. Commercial forges cost more
Hammer Low One good hammer is enough to start. Second-hand hammers are cheap
Tongs Low to moderate Two or three pairs to start. You can make your own
Safety gear Low Eye and ear protection, suitable clothing. Don’t skip it
Vise Moderate Second-hand leg vises vary in price. Can wait
Fuel Ongoing, moderate Propane or coal/charcoal. Depends on how often you forge
Steel stock Ongoing, low Mild steel bar is inexpensive. Tool steels cost more

Three ways to start

The shoestring start

  • A homemade forge (brake drum for coal or charcoal, or a small DIY gas forge)
  • A block of heavy steel or rail on end as an anvil
  • A flea-market hammer dressed on a grinder
  • Locking pliers or homemade tongs, plus forging off the end of long bars
  • A metal bucket of water
  • Bought safety gear

This is the cheapest route, and it teaches you a lot. Our guide to poorboy blacksmith tools covers each item.

The middle path

  • A small commercial or kit gas forge
  • A used steel anvil found through local listings or a blacksmithing group
  • One good forging hammer
  • A few pairs of bought tongs

Many hobbyists land here. It balances cost against time spent building tools.

The buy-it-new start

  • A commercial forge
  • A new forged or cast steel anvil from a reputable maker
  • A purpose-made hammer and a set of tongs
  • A leg vise and some hardy tools

This is the most comfortable route and the most expensive. Our anvil review and article on why anvils are so expensive explain the biggest line item.

Ongoing costs

  • Fuel. Propane is convenient but you pay for it the whole time the forge is lit. Coal and charcoal costs depend on local availability. Coal can be hard to find in some areas.
  • Steel. Mild steel bar from a steel supplier is inexpensive per project. Buying full-length bars is usually cheaper per foot than short pieces.
  • Consumables. Wire brushes, grinding discs, files, finishing wax or oil.
  • Replacements. Forge refractory lining wears out over time and needs patching or replacing.

Bladesmithing costs more

Knifemaking adds tools that general blacksmithing doesn’t strictly need:

  • A belt grinder for shaping and finishing blades. Many knifemakers consider one essential, and decent ones are a significant expense.
  • Heat treating equipment for consistent results, such as quench oil, possibly a kiln or oven
  • Abrasive belts, a steady ongoing cost
  • Handle materials and pins

If knives are your main goal, budget for these from the start.

Hidden costs people forget

  • Classes. Often money well spent. A day or weekend course lets you try tools before buying and helps you avoid expensive mistakes.
  • Workspace. You need a safe, ventilated space away from flammables, and a solid floor for the anvil.
  • Safety equipment. Fire extinguisher, carbon monoxide alarm for gas forges in enclosed spaces, eye and hearing protection. A decent leather apron is optional but useful.
  • Transport. Anvils and leg vises are heavy. Collecting a second-hand anvil may mean a trip and some lifting help.
  • Local rules and neighbours. Smoke and noise can cause friction. Check any local restrictions on open fires or solid-fuel burning.

Ways to keep it cheap

  1. Join a local blacksmithing group. Members often sell or lend tools, and many groups have shared forges.
  2. Make your own tools. Tongs, punches, chisels and hardy tools are all classic early projects.
  3. Buy one good hammer instead of several. See our guide to choosing your first blacksmith hammer.
  4. Buy only the tongs you need. Our tongs guide lists the first few to get.
  5. Be patient with the anvil. Use a steel block while you look for a fair deal on a real anvil.
  6. Avoid cheap cast iron anvils. They often end up being replaced, which costs more in the end.
  7. Don’t over-buy fuel or steel until you know how often you’ll forge.

Can the hobby pay for itself?

Some hobbyists sell hooks, bottle openers, fire pokers and similar items at craft fairs or online, which can offset the cost of tools and materials. Making a real profit takes time, skill and consistent quality, so it’s best to start for the enjoyment and treat any sales as a bonus.

To see what you’d be learning along the way, read about the 7 skills of a blacksmith. For a buying order that spreads the cost, see our essential blacksmithing kit guide.

The complete guide to anvils and tools

Blacksmithing Tools of the Trade: The Beginner's Essential Kit
Read the guide

Keep exploring

Guides from other topics

All topics →