Anvils and Tools

How heavy should a blacksmith anvil be?

How heavy a blacksmith anvil should be for beginners, knifemaking and heavy work, why mass under the hammer matters, and how to read old hundredweight marks.

On this page
  1. The short answer
  2. Weight ranges by type of work
  3. Why weight matters
  4. Mass under the hammer matters more than the total
  5. The hammer-to-anvil rule of thumb
  6. Mounting can make a lighter anvil work harder
  7. Practical limits on going heavier
  8. Reading weight marks on old anvils (hundredweight)
  9. Bottom line

The short answer

For general hobby blacksmithing, a good steel anvil somewhere in the region of 75 to 150 pounds (roughly 35 to 70 kg) is a practical target for most beginners. It’s heavy enough to stay put and return the hammer’s energy for typical bar sizes, and still light enough to move and afford. Heavier anvils, at 150 to 250 pounds and beyond, are welcome for larger stock and heavy work. Lighter anvils can do small work well if they’re high quality and solidly mounted.

Weight is only part of the story, though. A sound, hard-faced 100-pound anvil will usually serve you better than a soft 200-pound one. Our anvil review covers how to judge quality.

Weight ranges by type of work

These are rough guides that many smiths would broadly agree with, not hard rules:

Weight Typical use
Under about 50 lb (23 kg) Jewellery, small decorative work, light tinkering, travel or demo anvils
About 50–100 lb (23–45 kg) Small hobby projects, hooks, small tools; workable for knifemaking if the mass is compact
About 100–150 lb (45–70 kg) General hobby blacksmithing, the common sweet spot for beginners
About 150–250 lb (70–115 kg) Comfortable general shop anvil, heavier stock, striking with a helper
250 lb+ (115 kg+) Heavy forging, large stock, professional shops

Why weight matters

When you strike hot steel on an anvil, some of the blow’s energy goes into moving the steel and some goes into moving the anvil. A heavier anvil moves less, so more energy stays in the work. A heavier anvil also:

  • Stays put rather than shifting or walking on its stand
  • Rings and bounces less under heavy blows
  • Handles larger stock and heavier hammers without feeling “lively”

Mass under the hammer matters more than the total

What really counts is how much metal sits directly beneath where you strike. Two anvils of the same weight can feel very different:

  • A London-pattern anvil with a long horn, long heel and narrow waist carries a good share of its weight out at the ends, away from the main striking area.
  • A block or post anvil, essentially a thick chunk of steel, puts nearly all its mass right under the face.

That’s why bladesmiths often do well on compact block anvils lighter than the general guidance above, and why a piece of heavy steel stood on end makes a surprisingly effective improvised anvil. When comparing anvils, look at the thickness of the body under the face, not just the stamped weight.

The hammer-to-anvil rule of thumb

An old guideline suggests the anvil should weigh something like 50 times as much as the hammer you use on it. With a typical 2- to 2.5-pound forging hammer, that points to an anvil in the region of 100 to 125 pounds. It’s a rough rule, not physics, but it’s a useful sanity check. If you plan to use heavier hammers, or have a striker swinging a sledge, aim heavier.

For help picking a hammer weight, see our guide to choosing your first blacksmith hammer.

Mounting can make a lighter anvil work harder

A firmly mounted anvil acts more like part of its stand and the ground beneath it. A loosely mounted one rocks and wastes energy. Securing your anvil tightly to a solid, heavy stand at the correct height will make it feel more solid and efficient, whatever its weight. Our guide to making an anvil stand explains how.

Practical limits on going heavier

Bigger isn’t automatically better for everyone. Consider:

  • Cost. Anvils are usually priced roughly by weight, so a heavier anvil generally costs more. Our article on why anvils are so expensive explains the pricing.
  • Moving it. A 150-pound anvil is a two-person lift or a job for a trolley. Plan for how you’ll get it home and into the shop. Lift carefully, or use mechanical help.
  • Floor and space. A heavy anvil and stand need a solid floor and room to work around them.
  • Portability. If you forge at demonstrations or move your setup often, a lighter anvil may suit you better.

Reading weight marks on old anvils (hundredweight)

Many older English anvils are stamped with three numbers using the hundredweight (cwt) system:

  • The first number is hundredweights, each 112 pounds.
  • The second number is quarter-hundredweights, each 28 pounds.
  • The third number is the remaining pounds.

So an anvil stamped 1-1-14 weighs (1 × 112) + (1 × 28) + 14 = 154 pounds. One stamped 0-3-20 weighs 84 + 20 = 104 pounds.

Some American makers stamped weight directly in pounds instead. Stamped weights were the weight when the anvil left the factory, so an old, worn anvil may weigh a little less today. If the marks are hard to read, our guide to inspecting a used anvil covers what else to look for.

Bottom line

If you’re buying your first anvil, aim for a hard-faced steel anvil in roughly the 75 to 150 pound range, with good mass under the face, and mount it solidly. Go heavier if you can afford and handle it, and don’t pass up a smaller high-quality anvil just because the number is lower. For where the anvil fits into the rest of your setup, see our essential blacksmithing kit.

The complete guide to anvils and tools

Blacksmithing Tools of the Trade: The Beginner's Essential Kit
Read the guide

Keep exploring

Guides from other topics

All topics →