The Short Answer
A blacksmith is a general metalworker who heats and hammers iron and steel to make and repair all kinds of objects: tools, hardware, gates, blades, art and more. A farrier is a specialist in equine hoof care. Farriers trim and balance horses’ hooves and make, fit and nail on horseshoes.
Farriers use many blacksmithing skills, since they forge and shape shoes, but they also need detailed knowledge of horse anatomy and lameness. Most blacksmiths don’t work on horses at all.
Farrier vs Blacksmith at a Glance
| Blacksmith | Farrier | |
|---|---|---|
| Main focus | Shaping iron and steel into many kinds of objects | Hoof care and shoeing horses |
| Typical work | Tools, hardware, gates, railings, blades, art, repairs | Trimming hooves, fitting shoes, remedial and corrective shoeing |
| Works on | Metal | Metal and live animals |
| Key knowledge | Metallurgy, forging techniques, design | Forging plus equine anatomy, gait and hoof health |
| Where they work | Usually a fixed shop | Often mobile, traveling to stables with a van and portable forge |
| Legal regulation | Generally unregulated | Legally regulated in some countries, including Great Britain |
| Word origin | “Black” (iron) + “smith” (metalworker) | From Latin ferrum, “iron” |
What a Blacksmith Does
Blacksmiths heat metal in a forge until it’s soft enough to shape, then work it on an anvil with hammers and other tools. Today’s blacksmiths might make:
- Architectural ironwork such as gates, railings and balustrades
- Hardware like hinges, latches, hooks and brackets
- Tools for themselves and other trades
- Knives and other blades (often as bladesmiths)
- Sculpture and decorative art
- Restoration work on historic ironwork
Modern smiths go by many titles. See What are modern day blacksmiths called? for a rundown.
What a Farrier Does
A farrier’s daily work centers on hooves:
- Trimming overgrown hooves to keep them balanced and healthy
- Shoeing: removing old shoes, preparing the hoof, then shaping and fitting new shoes and nailing them on
- Remedial or corrective shoeing for horses with injuries, disease or conformation problems, often in consultation with a veterinarian
- Specialist shoes for racing, sport, therapeutic needs or particular ground conditions
Many horses don’t need shoes and are kept barefoot with regular trims, but they still need a farrier.
Shoes can be fitted hot or cold. In hot shoeing, the farrier heats the shoe, shapes it, and briefly presses it against the hoof to check and seat the fit before cooling and nailing it. In cold shoeing, the shoe is shaped without heating. Many farriers today start from ready-made, machine-produced shoes and adjust them, though forging shoes from bar is still a core skill and is tested in farriery exams and competitions.
Where the Two Trades Came From
For most of history, the two jobs overlapped heavily. The village blacksmith shod horses as part of their general work, and in many rural places this lasted into the 20th century. Our guide to pioneer blacksmiths shows how much frontier smiths relied on shoeing work.
Specialization started early in some places. The word farrier comes through Old French from the Latin ferrum, meaning iron. In 14th-century England, during the reign of Edward III, records show farriers as a trade distinct from blacksmiths. A 1350 London ordinance set limits on what farriers could charge. Later, the Worshipful Company of Farriers was established in London to regulate the trade.
During the 19th and early 20th centuries, as factory-made goods reduced other blacksmithing work, many smiths shifted toward shoeing. Then, as cars and tractors replaced working horses, farriery itself shrank and became focused on riding, sport and leisure horses.
Tools: What’s Shared and What’s Different
Shared tools: both trades use a forge, an anvil, hammers and tongs.
Farrier-specific tools include:
- Hoof knife, for trimming the sole and frog
- Hoof nippers, for cutting back the hoof wall
- Rasp, for leveling and finishing the hoof
- Clinchers, for bending over the ends of nails
- Driving hammer, a lighter hammer for nailing shoes on
- Hoof stand, to support the horse’s foot while finishing
- Hoof testers, to locate pain or problems
Anvils differ too. Farriers’ anvils are usually lighter for portability and often have features designed for shaping shoes, such as a longer horn, a clip horn and a turning cam. Blacksmiths’ anvils tend to be heavier, with a large face for general forging.
Blacksmiths, meanwhile, use a wider range of forging tools, such as swages, fullers, hardies, punches, drifts and power hammers. See our glossary of common blacksmithing terms.
Training and Qualifications
Blacksmiths can learn through apprenticeships, college courses, short classes, guild and association programs, or self-study. In most places there’s no legal requirement to be qualified to work as a blacksmith.
Farriers generally need more formal training because they work on animals:
- In Great Britain, the Farriers (Registration) Act 1975 makes it illegal for anyone other than a registered farrier to shoe horses, apart from limited exceptions such as emergency first aid and approved trainees. The usual route to registration is a multi-year approved apprenticeship.
- In the United States, farriery isn’t regulated by federal law, and no single license is required. Farriers often attend farrier schools and may earn voluntary certifications from organizations such as the American Farrier’s Association.
Rules differ by country, so anyone considering farriery should check local requirements.
Can a Blacksmith Shoe a Horse?
It depends on where you are and what training they have. Historically, yes, blacksmiths routinely shod horses. Today, in Great Britain, a blacksmith who isn’t a registered farrier is generally not allowed to shoe a horse. In many other countries it may be legal, but shoeing requires specialist knowledge of hooves and horse behavior. Poor shoeing can lame a horse, and handling horses carries real risk of injury. For a horse’s welfare, it’s best to use a trained, qualified farrier.
Which Path Suits You?
- If you love horses, don’t mind traveling, and want a career with steady demand from horse owners, farriery may suit you.
- If you’re drawn to making things, whether tools, art, blades or architectural work, and want creative freedom, blacksmithing may be the better fit.
Both trades share the same roots at the forge. Many farriers enjoy general blacksmithing on the side, and many blacksmiths have a deep respect for the farrier’s specialized skills.