Blacksmith History

The Medieval Blacksmith: Work, Tools and Place in the Village

What medieval blacksmiths did: their daily work, tools, forges, products, specialist trades, guilds, status, patron saints, and the women who worked at the forge.

On this page
  1. What Did a Blacksmith Do in Medieval Times?
  2. Where Medieval Blacksmiths Worked
  3. A Day at the Medieval Forge
  4. Tools of the Medieval Blacksmith
  5. How Medieval Forges Got Hot Enough
  6. What Medieval Blacksmiths Made
  7. From One Smith to Many Trades
  8. Status: Respected, Needed, and Noisy
  9. Saints, Legends and the Medieval Smith
  10. Women in the Medieval Smithy

What Did a Blacksmith Do in Medieval Times?

In medieval Europe, roughly the 5th to the late 15th century, the blacksmith made and repaired almost every iron object a community used. On any given day, a medieval smith might:

  • Sharpen and re-forge plowshares and other farm tools
  • Make and fit horseshoes and the nails to hold them
  • Forge nails, hinges, latches, locks and keys for buildings
  • Repair cart and wagon fittings and chains
  • Make knives, axes, sickles and scythes
  • Produce or repair weapons and armor, especially in castles and towns

The smith was essential because iron tools wore out constantly in an economy based on farming and horses. A village without a smith had to send work elsewhere, which cost time that farmers often didn’t have.

Where Medieval Blacksmiths Worked

The Village Smithy

Most medieval smiths worked in villages, in a small shop often near the center or on a main road. The village smith was a generalist, doing whatever work local farmers needed. In many villages the smithy was one of the few places where people gathered regularly, apart from the church and the mill.

Manors and Castles

Large estates and castles often had their own smiths. On a manor, the smith might maintain the lord’s plow irons and other equipment, sometimes holding land in return. In castles, smiths kept weapons, armor, horseshoes and fittings in good repair. This work grew especially important in times of war.

Towns and Guilds

In towns, smiths and other metalworkers often organized into guilds. Guilds set quality standards, regulated apprenticeships, limited competition and protected members’ interests. Town smiths were more likely to specialize than village smiths, since a town had enough customers to support specialist trades.

Monasteries and Armies

Some monasteries had their own smithies, run by monks, lay brothers or employed smiths, to maintain buildings, tools and farms. Armies on campaign took smiths with them to shoe horses, repair weapons and keep up the supply of arrowheads and other equipment.

A Day at the Medieval Forge

A smith’s day typically started by lighting or reviving the fire, building it up with charcoal and working the bellows until the fire glowed hot. Work came in from customers: a farmer with a blunt plowshare, a carter with a broken chain, a household needing new hinges.

The smith heated each piece, brought it to the anvil with tongs, and hammered it into shape, often with an apprentice or striker swinging a heavier hammer under direction. Hot work went back into the fire again and again. Finished pieces were cooled in the slack tub, and edged tools were hardened and tempered.

The work was hot, heavy and loud, and the risk of burns and injuries was constant. Workdays generally followed daylight, which meant long hours in summer.

Tools of the Medieval Blacksmith

A medieval smith’s toolkit looks very familiar to modern smiths (compare our beginner’s essential kit):

  • Anvil: medieval anvils were often smaller and simpler than modern ones, and earlier examples sometimes had no horn
  • Hammers of various weights, including heavy sledges for strikers
  • Tongs in many shapes for holding different stock
  • Bellows, usually large leather bellows worked by hand or foot
  • Chisels, punches and drifts for cutting and making holes
  • Swages and fullers for shaping bar
  • Files and grindstones for finishing and sharpening
  • A water trough or tub for cooling and quenching

Many smiths made their own tongs, punches and chisels. For definitions of these and other tools, see our glossary of common blacksmithing terms.

How Medieval Forges Got Hot Enough

Medieval forges reached working temperatures with two things: charcoal and forced air.

Charcoal is made by slowly burning wood with little oxygen, which leaves almost pure carbon. It burns hot and clean. When bellows blow a steady stream of air into the heart of a charcoal fire, the temperature rises enough to bring iron to an orange or yellow forging heat and, at the hottest point, to welding heat.

A blacksmith’s forge didn’t need to melt iron, only make it soft enough to shape and weld. Producing iron from ore was a separate process done in smelting furnaces, often at different sites.

Later in the Middle Ages, water power was increasingly used in parts of Europe to drive large bellows and heavy trip hammers at ironworks. These mills could produce and work much larger amounts of iron than a village smith could by hand. Over time, larger furnaces also made it possible to produce cast iron in Europe. These developments mostly affected iron production rather than the everyday village smithy.

What Medieval Blacksmiths Made

Medieval smiths produced a huge range of goods:

  • Farming: plowshares, coulters, sickles, scythes, spades, forks, hoes, axes
  • Horses and transport: horseshoes, nails, bits, buckles, cart and wagon fittings
  • Buildings: nails, hinges, door straps, latches, bolts, locks and keys, window bars
  • Household: knives, pot hooks, cauldron hangers, fire irons, candleholders
  • Military: arrowheads, spearheads, swords, axes, armor and mail (often by specialists)
  • Churches and castles: decorative door hinges, grilles, gates and portcullis fittings

Some medieval church doors still carry elaborately scrolled iron hinges, showing that smiths could do highly decorative work as well as practical jobs.

From One Smith to Many Trades

As towns grew, metalworking split into specialist trades, particularly in larger cities:

  • Armorers made armor, and mail-makers made mail
  • Bladesmiths and cutlers made blades and knives
  • Lorimers made bits, spurs and other small horse fittings
  • Locksmiths made locks and keys
  • Nailers made nails
  • Farriers shod horses (see farrier vs blacksmith)

In the countryside, though, the village blacksmith usually remained a generalist who did a bit of everything.

Status: Respected, Needed, and Noisy

Medieval smiths were generally respected as skilled craftsmen, and their work was indispensable. Medieval writers sometimes listed metalworking among the “mechanical arts,” the practical skills that supported society. Most smiths were not wealthy, though. They were typically comfortable tradesmen rather than members of the elite. Our article Were blacksmiths typically wealthy? looks at this in more depth.

Not everyone loved having a smith next door. A late medieval English poem often called “The Blacksmiths” complains about the noise, smoke and clatter of smiths working at night, with lines full of hammering sounds and black-faced workers. It’s a vivid reminder of what living near a busy forge was like.

Saints, Legends and the Medieval Smith

Medieval smiths had their own patron saints and legends:

  • St Clement was widely honored by blacksmiths in England, and St Clement’s Day (23 November) was traditionally a smiths’ holiday.
  • St Eligius (St Eloi), a 7th-century goldsmith and bishop, was a patron of metalworkers and is associated with horses and farriers.
  • St Dunstan, a 10th-century archbishop of Canterbury said to have been a skilled metalworker, features in a popular legend. The devil visits his forge, and Dunstan seizes him by the nose with red-hot tongs. In another version, Dunstan nails a horseshoe to the devil’s hoof and only removes it when the devil promises never to enter a house with a horseshoe over the door.

These stories helped give the smith a special place in medieval folklore. For the smith gods of older traditions, see gods of the forge, and for England before the Normans, see Anglo-Saxon blacksmith skills.

Women in the Medieval Smithy

Most recorded medieval smiths were men, but women also worked at the forge. Records from England include Katherine Le Fevre, appointed by Edward III in 1346 to keep up the king’s forge in the Tower of London, and women who ran mail-making and armor businesses. Many more women worked in family smithies without being named. Read more in Did female blacksmiths exist?.

The complete guide to blacksmith history

Pioneer Blacksmiths: Facts About Life at the Frontier Forge
Read the guide

Keep exploring

Guides from other topics

All topics →