Blacksmith History

Colonial American Blacksmiths: Facts About the Trade in Early America

Colonial blacksmith facts: what smiths made, how apprenticeships worked, enslaved and free smiths, the Iron Act, the Revolution, and where to see colonial forges today.

On this page
  1. Colonial Blacksmith Facts at a Glance
  2. Blacksmiths from the First Settlements
  3. Where Colonial Iron Came From
  4. Inside a Colonial Blacksmith Shop
  5. What Colonial Blacksmiths Made
  6. Becoming a Blacksmith: Apprenticeship
  7. Who Worked at the Colonial Forge
  8. Getting Paid
  9. British Restrictions and the Iron Act
  10. Blacksmiths in the American Revolution
  11. Seeing Colonial Blacksmithing Today

Colonial Blacksmith Facts at a Glance

  • Blacksmiths were among the most essential tradespeople in the American colonies.
  • Lists of early Jamestown settlers include a blacksmith.
  • Colonial smiths worked mostly in wrought iron, with small amounts of steel for edges.
  • They made and repaired tools, hardware, nails, chains, horseshoes, wagon parts and cooking equipment.
  • Many learned through an apprenticeship that commonly lasted about seven years.
  • The colonial smithing workforce included free men, indentured servants and enslaved people.
  • British law, notably the Iron Act of 1750, restricted certain kinds of colonial iron manufacturing.
  • Blacksmiths supplied the Continental Army with weapons, tools and repairs during the Revolution.

Blacksmiths from the First Settlements

From the start of English colonization, settlers knew they would need smiths. Lists of the first colonists at Jamestown in Virginia in 1607 include a blacksmith. In New England and the other colonies, blacksmiths were similarly valued, and some towns offered incentives such as land to attract a smith.

The reason was simple. Iron tools broke and wore out, and shipping replacements from England was slow and expensive. A local smith made a settlement far more self-sufficient.

Where Colonial Iron Came From

At first, much of the colonies’ iron came from England as bar iron and finished goods. Colonists soon began producing their own. The Saugus Iron Works in Massachusetts, founded in the 1640s, is generally considered the first integrated ironworks in North America. It had a blast furnace, a forge and a rolling and slitting mill. The site is now preserved as a National Historic Site.

Over the 1700s, ironworks spread through Pennsylvania, New Jersey, Maryland, Virginia and other colonies, often using local bog ore or rock ore and huge amounts of charcoal. These works produced pig iron and bar iron, which blacksmiths then shaped into finished goods.

Inside a Colonial Blacksmith Shop

A typical colonial smithy had a brick or stone forge with a chimney, a large leather bellows, an anvil on a wooden stump, a slack tub, a heavy vise, and racks of hammers and tongs. Shops were often kept fairly dark so the smith could judge the heat of iron by its glowing color.

Heavy equipment such as anvils and vises was often imported from England, while smiths commonly made their own tongs, punches and chisels. A visitor to Colonial Williamsburg’s Anderson Blacksmith Shop and Public Armoury today will see this kind of layout: hearth, anvil and water trough set close together so the smith can move quickly between them. Shop habits like keeping the hammer on the anvil, and setting hot work down in a consistent place, help keep the work safe and rhythmic.

For the names of the tools and parts of the shop, see our glossary of common blacksmithing terms.

What Colonial Blacksmiths Made

Colonial smiths were generalists. Their work included:

  • Farm tools: plowshares, hoes, axes, mattocks, scythes, pitchforks, chains
  • Building hardware: nails, strap hinges, H-hinges, thumb latches, bolts, hooks
  • Hearth and kitchen: pot hooks, trammels, fireplace cranes, trivets, fire tools
  • Transport: horseshoes, wagon tires, axle fittings, harness hardware
  • Repairs: mending broken tools, guns, chains and household items

Hand-forged nails were a steady product, as nails were in constant demand for building. Toward the end of the 18th century, machines for cutting nails from iron plate began to appear, and over time they took over much of this work, as covered in when they stopped using iron nails.

Many colonial blacksmiths also shod horses, though in larger towns some specialized in that work. See farrier vs blacksmith for how the roles differ.

Becoming a Blacksmith: Apprenticeship

Colonial blacksmiths usually learned through apprenticeship, following the English model. A boy, often in his early teens, was bound by contract to a master for a fixed term, commonly about seven years. The master provided food, lodging, clothing and training, and sometimes basic schooling in reading, writing and arithmetic. In return, the apprentice worked for free.

After completing the apprenticeship, a young smith became a journeyman, working for wages in other masters’ shops. With enough skill and money, he might set up his own shop as a master. Not every smith followed this formal path. Many learned informally from fathers or relatives. The modern equivalents are covered in our guide to blacksmithing apprenticeships in the USA.

Who Worked at the Colonial Forge

The colonial smithing workforce was diverse. It included free tradesmen, indentured servants working off their passage, and, especially in the southern colonies, enslaved blacksmiths.

Enslaved smiths were highly skilled and valuable. Many large plantations had their own blacksmith shops staffed by enslaved workers. Enslavers sometimes hired these smiths out to other employers and kept most or all of the earnings. Some enslaved smiths were allowed to keep part of their wages, and a few managed to buy their freedom. Their contributions to colonial and early American metalworking were substantial but often went unrecorded or uncredited.

Women occasionally worked in colonial smithies too, usually in family businesses. See Did female blacksmiths exist?.

Getting Paid

Cash was often scarce in the colonies, so blacksmiths commonly kept account books recording what each customer owed. Customers might pay months later in coin, paper money, goods such as grain or meat, or labor. Smiths in turn used credit with local merchants. This web of credit was typical of colonial economies.

Most colonial blacksmiths were respected “middling” tradespeople. Some became quite prosperous, especially if they invested in land or ironworks, but most earned a modest, steady living. See Were blacksmiths typically wealthy?.

British Restrictions and the Iron Act

Britain wanted the colonies to supply raw materials and buy finished British goods. The Iron Act of 1750 encouraged colonists to export pig iron and bar iron to Britain. At the same time, it banned building new slitting and rolling mills, plating forges with tilt hammers, and steel furnaces in the colonies. Those were the facilities that would let colonists make finished iron goods on a large scale.

The Act didn’t stop local blacksmiths from making everyday items, and enforcement was uneven. But colonists resented it as an example of British economic control. It was one of many grievances that fed into the tensions before the Revolution.

Blacksmiths in the American Revolution

When war came in 1775, blacksmiths became even more important. They made and repaired bayonets, gun parts, tools, horseshoes, wagon fittings and camp equipment for the Continental Army and local militias.

At Williamsburg, James Anderson ran a public armoury that repaired weapons and produced equipment for Virginia’s forces. The reconstructed Anderson Blacksmith Shop and Public Armoury at Colonial Williamsburg is based on that site.

One of the most famous ironworking projects of the war was the Great Chain across the Hudson River at West Point, installed in 1778 to block British ships. Its links were forged at an ironworks in New York and joined into a chain hundreds of yards long. Some surviving links are displayed at West Point today.

Seeing Colonial Blacksmithing Today

You can watch traditional colonial smithing at a number of historic sites, including:

  • Colonial Williamsburg, Virginia, with working trade shops including the Anderson Blacksmith Shop
  • Saugus Iron Works National Historic Site, Massachusetts
  • Many state and local living-history museums and historic farms across the eastern United States

For what happened to the trade as Americans moved west, see our guide to pioneer blacksmiths, and for the European background, see The Medieval Blacksmith.

The complete guide to blacksmith history

Pioneer Blacksmiths: Facts About Life at the Frontier Forge
Read the guide

Keep exploring

Guides from other topics

All topics →