Blacksmith History

Anglo-Saxon Blacksmith Skills

What Anglo-Saxon blacksmiths could do: bloomery iron, forge welding, pattern-welded swords, inlaid seaxes, their tools, and their status in law and legend.

On this page
  1. Who Were Anglo-Saxon Blacksmiths?
  2. Getting Iron: The Bloomery
  3. How Their Forges Got Hot Enough
  4. Core Anglo-Saxon Smithing Skills
  5. A Smith’s Toolkit: The Tattershall Thorpe Grave
  6. What Anglo-Saxon Smiths Made
  7. The Smith’s Status in Law and Literature
  8. Weland: The Legendary Smith of the Anglo-Saxons
  9. Anglo-Saxon Smithing Words We Still Use

Who Were Anglo-Saxon Blacksmiths?

The Anglo-Saxon period in England runs roughly from the 5th century to the Norman Conquest in 1066. Over those six centuries, the blacksmith was one of the most important craftsmen in any community. A smith made and mended the tools that farming depended on, the fittings for buildings and carts, and the weapons of the warrior class.

A blacksmith, then as now, was someone who shaped iron by heating it and hammering it. The Old English word was smiþ, which could refer to a skilled worker in general. A specific ironworker might be an īsern-smiþ, or iron-smith. Both men and women may have done some smithing on farms, though the craftsmen named in surviving records are men.

Anglo-Saxon smiths ranged from farmers doing their own repairs to highly skilled specialists who worked for kings. The skills described below were not all practiced by every smith, but together they show how capable the craft was.

Getting Iron: The Bloomery

There was no factory-made bar stock. Iron began as ore, often bog ore or ironstone, which was roasted and then smelted in a bloomery. This was a small clay furnace filled with charcoal and ore, with air blown in through bellows.

The bloomery never got hot enough to melt iron fully. Instead, it produced a spongy mass of iron and slag called a bloom. Turning a bloom into usable iron took a great deal of hammering at high heat to drive out the slag and consolidate the metal. Depending on the ore and how the furnace was run, the result could range from soft iron to steel with a fair amount of carbon.

Telling the difference between softer and harder material by how it behaved under the hammer and when quenched was itself a key skill.

How Their Forges Got Hot Enough

People often ask how early forges reached the heat needed to work and weld iron. The answer is charcoal plus forced air. Charcoal burns hot and clean, and a pair of leather bellows pushing air into the fire through a clay or stone nozzle (the tuyere) raises the temperature dramatically.

With a well-managed fire, an Anglo-Saxon smith could bring iron to a yellow or near-white heat, hot enough to forge-weld. The fire also had to be managed so that it didn’t burn the iron or add unwanted oxygen, which takes practice to judge by eye.

Forges could be at ground level or raised on a hearth of clay and stone. Excavated smithing sites in England often show hearths, slag and hammerscale (tiny flakes of iron oxide that fly off during hammering).

Core Anglo-Saxon Smithing Skills

Basic Forging

Anglo-Saxon smiths used the same basic operations smiths use today:

  • Drawing out bars into points, tapers and blades
  • Upsetting to thicken metal
  • Bending and scrolling
  • Punching and drifting holes for handles, rivets and nails
  • Cutting hot iron with chisels

If any of these terms are new, our glossary of common blacksmithing terms defines them.

Forge Welding and Steeling Edges

Forge welding, joining two pieces of iron by heating them to welding heat and hammering them together, was essential. Steel was valuable, so smiths often welded a strip of harder steel onto a softer iron body to make the cutting edge of knives, axes and other tools. This approach, often called “steeling,” gave a tool that was tough overall but could take and hold a sharp edge.

Archaeological study of Anglo-Saxon knives shows a range of constructions, including steel cores sandwiched between iron and steel edges welded onto iron backs. This variety suggests smiths made deliberate choices about how to use different materials.

Pattern Welding

The most impressive skill was pattern welding. Smiths twisted rods of iron and steel together, forge-welded them into a bundle, and then welded this core to separate steel edges. After grinding and etching, the blade showed swirling or herringbone patterns. Modern bladesmiths use the same principle to make pattern-welded “Damascus” steel.

Many early Anglo-Saxon swords were pattern-welded, and spearheads and some seaxes (single-edged knives and short swords) were too. Making a pattern-welded sword required many welds and a lot of time and fuel. These blades were prestigious objects, often handed down or buried with high-status individuals. The sword from the Sutton Hoo ship burial in Suffolk, dated to the early 600s, is a well-known pattern-welded example.

Inlay and Decoration

Smiths also decorated iron with other metals. A famous example is the Seax of Beagnoth, a 10th-century seax found in the River Thames. Its blade is inlaid with copper, brass and silver wire, spelling out the full runic alphabet used in England along with the name Beagnoth. Techniques like this needed fine control of grooves and wire as well as heat.

A Smith’s Toolkit: The Tattershall Thorpe Grave

One of the best windows into the craft is a 7th-century grave excavated at Tattershall Thorpe in Lincolnshire. It contained a collection of smithing tools and materials, including hammers, tongs, shears, files, punches and a small anvil, along with scrap metal and other items.

The find suggests a skilled metalworker, possibly one who traveled, who worked both iron and finer metals. It shows that the basic toolkit of hammer, tongs, anvil, files and punches was already well established in early Anglo-Saxon England.

What Anglo-Saxon Smiths Made

Most of a smith’s output was practical:

  • Plowshares and coulters (the blade in front of the share)
  • Sickles, scythes, spades, shears and axes
  • Knives of all sizes, the most common iron object in many settlements
  • Nails, rivets, hinges, staples, keys and locks
  • Bucket and cauldron fittings, chains and hooks
  • Horse gear such as bits and, later in the period, more horseshoes
  • Weapons: spearheads, seaxes, swords, shield fittings and arrowheads

The Smith’s Status in Law and Literature

Several texts suggest that smiths were valued. An early Kentish law code attributed to King Æthelberht, from around 600, mentions the king’s smith, which shows that kings had their own smiths and that the role was important enough to appear in law.

Around the year 1000, the monk Ælfric wrote a teaching dialogue, known as Ælfric’s Colloquy, in which different workers argue about whose trade is most useful. The smith asks, in effect, where the plowman would get his plowshare or the fisherman his hook without him. In the dialogue, the counsellor ultimately gives first place to farming, but the smith’s argument shows how people understood his role: other trades relied on the tools he made.

Weland: The Legendary Smith of the Anglo-Saxons

The Anglo-Saxons knew the story of Weland (Wayland), a master smith who is captured and lamed by a king, takes a bloody revenge, and escapes on wings he forges. His story is shared with Norse tradition, where he is called Völundr.

Weland appears on the front panel of the Franks Casket, a carved whalebone box from 8th-century Northumbria, which shows him at work in his smithy. A Neolithic long barrow on the Ridgeway in Oxfordshire came to be called Wayland’s Smithy. Local legend says that if you leave a horse and a coin there overnight, the horse will be shod by morning.

For more on the wider Norse world of smiths, see our Viking blacksmith facts, and for legendary smiths in other cultures, read about gods of the forge.

Anglo-Saxon Smithing Words We Still Use

Several everyday words come straight from Old English:

  • Smith, from Old English smiþ
  • Smithy, related to Old English smiþþe
  • Anvil, from Old English anfilte
  • Iron, from Old English īsern or īren
  • Tongs, from Old English tang

These words also live on in English surnames and place names. Our article on why Smith is the most common surname traces that legacy, and the later period is covered in The Medieval Blacksmith.

The complete guide to blacksmith history

Pioneer Blacksmiths: Facts About Life at the Frontier Forge
Read the guide

Keep exploring

Guides from other topics

All topics →