Forge Building

Can you use regular bricks for a forge?

Regular bricks aren't a safe forge lining: they can crack, spall and waste heat. Learn where common brick is fine, why to avoid cinder blocks, and better options.

On this page
  1. The short answer
  2. Why ordinary bricks are a poor forge lining
  3. Concrete blocks, cinder blocks and pavers: avoid them
  4. Where regular bricks are fine
  5. How to tell firebrick from common brick
  6. Better options that don’t cost much
  7. If you’ve already built with regular bricks

The short answer

Not for the parts of the forge that face the fire. Ordinary building bricks aren’t made for the repeated, intense heating and cooling inside a forge. They can crack, spall (shed chips or flakes), and soak up heat that should be going into your steel. Concrete blocks, cinder blocks and pavers are worse and should be kept away from the fire entirely.

Regular bricks can still be useful in a forge build. Just keep them away from the hot face.

Why ordinary bricks are a poor forge lining

  • They aren’t rated for forge temperatures. Common brick is fired during manufacture, but it isn’t made to handle sustained forging heat over and over. Refractory bricks are made from different clays and materials specifically for this.
  • Thermal shock. A forge goes from cold to very hot quickly, and the inside face gets much hotter than the outside. That uneven expansion can crack bricks not designed for it.
  • Moisture. Building bricks can hold water. Water heated quickly inside a brick turns to steam, which can pop pieces off the surface.
  • They waste heat. Dense common brick absorbs a lot of heat and insulates poorly, so a forge made of it is slow and fuel-hungry, much like an all-hard-firebrick forge but without firebrick’s heat resistance.

Concrete blocks, cinder blocks and pavers: avoid them

Concrete products contain water chemically bound in the cement, as well as moisture in their pores. When heated strongly, they can spall, sometimes violently, throwing hot fragments. They can also crumble as the cement breaks down. Don’t use concrete, cinder block, breeze block or concrete pavers to line or build the hot part of a forge, and don’t build a fire directly on a concrete slab.

Where regular bricks are fine

Common bricks can play a supporting role, away from direct flame:

  • Base or plinth under a forge that has its own proper hearth or lining
  • Windbreak around an outdoor forge, at a sensible distance from the fire
  • Outer shell of a solid-fuel forge, as long as there’s a proper firebrick or clay lining between the fire and the bricks
  • Shelves or rests for tools, away from the hot zone

If you’re not sure whether a spot gets too hot, assume it does and use firebrick there.

How to tell firebrick from common brick

  • Color: hard firebricks are usually pale cream, buff or tan. Common building bricks are often red or brown, though colors vary.
  • Weight and texture: insulating firebrick is very light and soft enough to scratch with a fingernail or cut with a handsaw. Hard firebrick is heavy and dense, with a fairly smooth, even texture.
  • Holes: many building bricks have holes or a recessed “frog.” Firebricks are usually solid.
  • Markings: some firebricks are stamped with a brand or grade.
  • When in doubt: buy firebricks you know are firebricks. Salvaged bricks of unknown type are a gamble.

Better options that don’t cost much

  • Soft insulating firebrick (IFB) for the chamber of a small gas or torch forge
  • Hard firebrick for floors and solid-fuel hearths
  • Ceramic fiber blanket with a refractory coating, for a gas forge
  • Clay or a clay-rich soil mix to line a coal or charcoal forge. The JABOD design uses packed dirt as its insulation.

Our guide to building a hard firebrick forge explains the difference between hard and insulating firebrick and how to stack a brick forge. Our guide to building a forge on a budget covers cheap builds that skip common brick entirely.

If you’ve already built with regular bricks

  • Don’t fire it hot right away. If you decide to test it, start with short, gentle fires, stand clear, and wear eye protection.
  • Watch for cracking or popping. Stop and rebuild if you see pieces breaking off.
  • Replace the bricks that face the fire with firebrick, or line them with firebrick or clay. The common bricks can then serve as the outer structure.
  • Remove any concrete products from the hot zone completely.

For an overview of complete forge designs, see our beginner’s guide to building a blacksmith forge.

The complete guide to forge building

How to Build Your Own Blacksmith Forge: Plans for Beginners
Read the guide

Keep exploring

Guides from other topics

All topics →