The short answer
Yes, for small work. A handheld propane torch can bring thin steel to forging heat, especially when the torch fires into a small insulated enclosure such as a “two-brick forge.” It’s a useful way to try blacksmithing, make small items or heat one spot on a part.
It isn’t a substitute for a real forge for anything but light stock, and you’ll quickly feel the limits once you move to thicker bar.
What a torch can and can’t heat
A torch flame is small. In open air, much of its heat is lost to the surroundings.
Usually workable:
- Thin rod and wire
- Nails and small hooks
- Small decorative pieces and simple jewelry-style work
- Heating one small area of a larger part, for bending or a quick adjustment
Usually frustrating:
- Thicker bar stock, where heat soaks away into the rest of the piece faster than the torch can add it
- Long sections that need an even heat
- Knife blades of any real size
- Forge welding
Exactly where the limit falls depends on the torch, the fuel, the enclosure and the stock, so expect some trial and error.
Make the torch work harder: the two-brick forge
Surrounding the work with insulation makes a big difference. The classic setup:
- Take two soft insulating firebricks (IFB), not hard firebrick or common brick.
- Carve or drill a small chamber between or through them, just large enough for your work.
- Cut a port so the torch flame enters the chamber, angled so it swirls around the work rather than blasting straight through.
- Leave a small opening at the front for the work and somewhere for exhaust to escape.
- Set the bricks on a non-combustible surface, and clamp or frame them so they don’t shift.
The insulating brick reflects and holds the heat, so steel in the chamber gets much hotter than it would in the open flame. Wear a respirator when cutting IFB; the dust shouldn’t be breathed. For more on why brick choice matters, see can you use regular bricks for a forge and building a hard firebrick forge.
Propane vs. MAP-Pro torches
- Propane is cheap and widely available, and works for small work in an insulated enclosure.
- MAP-Pro and similar gases burn hotter in air than propane. They usually cost more per cylinder, but they can noticeably speed up heating in a small torch forge.
Torch heads matter too. A torch rated for MAP-Pro use is a sensible choice if you might use either gas. Check the manufacturer’s guidance.
Fuel: disposable cylinders vs. a bulk tank
Small disposable cylinders are convenient but can run down quickly at full flow, and they cool as they empty, which reduces output. Some people connect their torch to a 20 lb tank with the proper adapter hose and regulator. For longer sessions, that’s often cheaper per hour. If you go this route, use parts made for the purpose and check them with soapy water for leaks. See how long a 20 lb propane tank lasts on a forge for how propane use adds up.
Safety points specific to torch forges
- Keep the cylinder away from the heat. Don’t put the cylinder, or the torch’s regulator body, inside or right next to the hot bricks. Mount or clamp the torch so only the nozzle points into the chamber.
- Don’t enclose the whole torch. Heat building up around the torch head or cylinder is dangerous.
- Stable setup. A torch that falls over while lit is a fire hazard. Use a stand or clamp.
- Ventilation. A small torch can still produce carbon monoxide. Work outdoors or with good airflow.
- Clear surroundings. Work on a non-combustible surface away from flammables, with a fire extinguisher nearby.
- Eye protection and natural-fiber clothing, as with any forging.
When to move up to a real forge
You’ve probably outgrown the torch when:
- You spend most of your session waiting for heat
- You want to work stock thicker than the torch can manage
- You want to make blades or longer pieces
- You go through disposable cylinders faster than you’d like
A small propane forge is the natural next step. See building a gas bottle propane forge and burners, or compare options in what is the best forge for beginners. If cost is the main concern, building a forge on a budget covers several cheap routes.