Projects

Why do blacksmiths double tap the anvil?

Blacksmiths tap the anvil between blows to keep rhythm, use the hammer's rebound, reposition the work and signal a striker. Here's what's practical and what's lore.

On this page
  1. The Short Answer
  2. Keeping a Steady Rhythm
  3. Using the Anvil’s Rebound
  4. A Moment to Reposition and Look
  5. Signaling a Striker
  6. Tradition, Habit and Folklore
  7. Do You Need to Do It?
  8. A Few Cautions

The Short Answer

When a blacksmith taps the hammer on the bare anvil between working blows, often in a quick “tap-tap” pattern, it’s mostly about rhythm and control. The light extra tap lets the smith:

  • keep the hammer moving in a steady rhythm instead of stopping and starting
  • use the anvil’s rebound to bounce the hammer back up, which can save a little effort
  • buy a split second to turn or move the workpiece and look at it
  • signal a helper (a striker) when to hit, where, and when to stop

Part of it is also simple habit and tradition, passed from teacher to student. There’s some folklore around ringing the anvil too. Not every smith does it, and it isn’t needed to forge well.

Keeping a Steady Rhythm

Forging is rhythmic work. Steel stays at working heat for only a short time, so smiths try to land as many useful blows as possible in each heat. A steady rhythm helps. But between blows the smith often needs to rotate the bar, slide it along the anvil or change the angle.

Instead of stopping the hammer completely while doing that, many smiths let it fall lightly on the anvil face. This keeps the arm in its rhythm, so the next working blow comes at the right moment and with consistent force. Once it becomes habit, the tap is a kind of timekeeping.

Using the Anvil’s Rebound

A good anvil has a lot of rebound: a hammer dropped on the face bounces back strongly. Smiths with a relaxed grip can use that bounce to help lift the hammer for the next blow, so their arm does a little less work. A light tap on the bare face, where the rebound is best, gives a quick bounce that sets up the next strike.

How much energy this really saves is debated among smiths. Some find it helps over a long session. Others see little benefit. It depends on the anvil, the hammer, the smith’s grip and the kind of work.

A Moment to Reposition and Look

The tap often happens just as the smith is turning the work, for example rotating a bar 90 degrees while drawing out a taper. The hammer comes down on the anvil while the other hand turns the piece. This keeps the smith from hitting the workpiece before it’s in position. It also gives a fraction of a second to check the shape before the next blow.

Signaling a Striker

Historically, much heavy forging was done by a smith and one or more strikers: assistants who swung a heavy sledgehammer. The smith held the work and a lighter hand hammer and directed the sledge blows. A tap on the work showed where the striker should hit next. Taps on the anvil could mean things like “keep going,” “lighter” or “stop.”

These signals weren’t universal. They varied between shops and regions, and between smiths and their regular strikers. But the habit of talking to a helper through hammer taps is one widely given explanation for why some smiths still tap the anvil when working alone. Smith-and-striker teamwork is also part of traditional jobs such as setting large hot rivets. Our guide to blacksmith riveting techniques covers riveting at hobby scale.

Tradition, Habit and Folklore

A lot of blacksmithing is learned by copying a teacher, so habits get passed down whether or not the student knows why. Many smiths tap the anvil simply because the person who taught them did.

There’s also folklore about ringing the anvil. Stories in various traditions say it kept bad luck or evil spirits away, or note that the anvil’s ring told the village the smithy was at work. These are best treated as folklore, not as the practical reason for the habit. They’re a reminder of how central the smithy once was to community life.

Do You Need to Do It?

No. Plenty of skilled smiths rarely or never tap the anvil between blows, and the work turns out just as well. If you’re learning, focus first on:

  • landing blows where you mean them, with the hammer face flat to the work
  • a relaxed grip and a comfortable working height
  • planning each heat so you’re not wasting time while the steel cools

If a rhythm with taps develops naturally as you get comfortable, that’s fine. Forcing it before your hammer control is solid can just add noise and distraction. For the basic moves you’ll be using, see How do you forge metal?.

A Few Cautions

  • Keep taps light. Hitting a hardened anvil face hard with a hardened hammer, with no hot steel between them, risks chipping either one. Flying chips are a real eye hazard, so always wear safety glasses.
  • Protect your hearing. Bare-anvil taps ring loudly. Some anvils are particularly loud, and the noise adds up over a session. Earplugs or earmuffs are worth wearing.
  • Don’t let the tap replace attention. A rhythmic habit is useful only if you’re still watching the work.

If you’re just starting out, our blacksmith project plans for beginners list small projects that are ideal for building hammer control and rhythm.

The complete guide to projects

Blacksmith Project Plans for Beginners
Read the guide

Keep exploring

Guides from other topics

All topics →